Fitting The Photocells - BFT IANUS BT 300 Kit Instructions D'utilisation Et D'installation

FITTING THE PHOTOCELLS

DIMENSIONS
43 mm
TO PASS WIRES FROM THE WALL break the back hole
34
- IANUS BT 300 KIT - IANUS BT 500 KIT
CORRECT ALIGNMENT
37 mm
In both cases, now fold the plugs to close the holes:
RX
min. 1m
TX
OK
OR break the FRONT hole and insert the WIRE CLAMP
TO PASS WIRE THROUGH THE EXTERNAL RACEWAY
Not provided
PG11
max 24 mm
PAIR 1
TX
PAIR 2
(OPTIONAL)
RX
KO