Switching Off The Collar; Changing Modes - Num'axes Canicalm Sonic Guide D'utilisation

Switching On the collar
Briefly place (for less than 1 second) the magnetic key close to the white mark located in front
of the collar.
1, 2 or 3 short beep sounds are emitted (according to the chosen mode) and indicate that the
collar has been switched on.
In the factory, the collar's mode is positioned on mode 3 (ultrasounds + vibrations).

Switching Off the collar

Briefly place (for less than 1 second) the magnetic key close to the white mark located in front
of the collar.
1 long beep sound indicates that the collar has been switched off.

Changing modes

In the factory, the collar's mode is positioned on mode 3 (ultrasounds + vibrations).
To change the collar's mode, when switching on the collar you need to approach and keep the
magnetic key in contact with the white mark.
A series of beep sounds is emitted (from 1 to 3 beeps) indicating the selected mode.
Keep the magnetic key in contact with the white mark to run through modes.
Remove the magnetic key when you have reached the mode you wish.
The collar will memorize your selected mode.
Next time you will switch on the collar, your collar will be turned on to the last mode you
previously selected.
Diagram 4
Gb - 13