ETNA A566ZT Notice D'utilisation page 20

Metallic sheens are caused by metal pans
sliding over the glass. They can be remo-
ved by thorough cleaning with a special,
GB
glass ceramic cleaning agent (for exam-
ple, Vitroclen), although it may be that the
cleaning needs to be repeated more than
once.
Worn trim is the result of using abrasive
cleaning products or pans with uneven
bases which wear down the serigraphy.
Take great care when using the
glass scraper. The blade can cause
injury!
Only use the blade on the glass
ceramic surface - avoid the body of the
scraper coming into contact with the
glass, since this could scratch the
glass ceramic.
Use blades that are in perfect con-
ditions, and change the blade as soon
as it shows any sign of wear.
When you finish using the scra-
per, fold it away and cover it well up.
(See fig. 7).
Using the scraper
Protected blade
Pans may stick to the glass if
something has melted between them.
Do not attempt to unstick the pan when
it is cold - you could break the glass
ceramic.
Do not stand on the glass or lean
20
fig. 7
Unprotected blade
on it, for it might break and cause
injury. Do not put any objects down on
the glass.
ETNA reserves the right to alter its manuals
in any way it deems necessary or useful
while not altering their basic characteristics.