Leveling Refrigerator - Amana ART2127AB Manuel De Réparation

Leveling Refrigerator

!
CAUTION
To avoid property damage, protect soft vinyl or other
flooring with cardboard, rugs, or other protective material
when moving refrigerator. If model uses stabilizing leg,
verify leg is raised before moving refrigerator. Raise
stabilizing leg by turning counterclockwise.
If your refrigerator requires ice maker water supply
connection, proceed to Connect Ice Maker Water Supply
section before leveling your refrigerator.
1. Plug in power cord.
2. Move refrigerator into final location.
3. Level refrigerator using a level placed on top of the
refrigerator.
• Remove toe grille. Remove bottom hinge cover if
refrigerator has a stabilizing leg.
3
• Turn / " hex head roller adjustment screws to raise
8
or lower refrigerator cabinet. Front of refrigerator
must be ¼" (6 mm), or ½ bubble on your level,
higher than the back of refrigerator.
• Make sure refrigerator cabinet is level from side to
side by adjusting left and right roller adjustment
screw (A) .
• Turn stabilizing leg (B–some models) clockwise
until firmly against floor.
A
4. Replace toe grille and bottom hinge cover. See
markings on inside or bottom of grille to insure proper
placement.
• Snap top portion into place first. Press down on
lower part of grille until bottom portion snaps into
place.
5. Review Installation Checklist in Owner's Manual with
consumer.
B
6