Dairy Center (Some Models); Door Buckets; Door Shelves; Deepfreeze Features - Amana ART2127AB Manuel De Réparation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dairy Center (some models)

Dairy center provides convenient storage for items such
as butter, cheese, etc.
• Remove dairy center (A) by lifting door, pushing
tabs (B) toward center and pulling out.
• Replace dairy center (A) by sliding in until tabs (B) lock
into place and lowering door.
A

Door Buckets

Door buckets adjust to meet individual storage needs.
• Remove door buckets by pushing tabs (A) toward
center and pulling out.
• Replace door buckets by sliding in until tabs (A) lock
into place.
A

Door Shelves

• Remove door shelves by lifting ends and pulling out.
• Replace door shelves by placing shelf on glides (A)
and sliding down.
A
®
Deepfreeze
Features
!
To avoid property damage, confirm shelf is secure
before replacing items on shelf.
B
CAUTION

Automatic Ice Maker (some models)

• Confirm ice bucket is in place and ice maker arm (B) is
down.
• After Deepfreeze
®
section reaches normal temperature,
ice maker fills with water and begins operating. Allow
24–48 hours after installation before first harvest of ice.
Ice maker produces 7 to 9 harvests of ice in a 24-hour
period under ideal conditions.
• After ice is formed, ice maker drops ice cubes into
ice storage bucket. During ice production, ice maker
arm (B) raises and lowers. When ice storage bucket is
full, ice maker arm turns ice maker off. Discard first 3
harvests of ice after initially connecting refrigerator to
household water supply and after extended periods of
nonuse.
• Stop ice production by raising ice maker arm (A) . A
definite click is heard when proper position is reached.
Ice maker arm will remain in that position until pushed
down (C) .
!
To avoid damage to the automatic ice maker:
• Do not force ice maker arm down or up, past stop
• Do not place or store anything in ice storage bucket.

Wire Shelf

• Remove wire shelf by tilting one end up and pulling out.
• Replace wire shelf by tilting one end up and placing end
on ledge. Tilt other end down and place on ledge.
10
A
B
C
CAUTION

Publicité

Table des Matières
loading

Table des Matières