PREHEAT
1.
Wipe the grill plate with a little cooking oil or butter. Don't use low fat spread – it may burn
on to the grill.
2.
Turn the temperature control fully anticlockwise.
3.
Plug the connector into the power inlet on the appliance.
4.
Put the plug into the power socket.
5.
Set the temperature control to the required temperature.
6.
The light will glow, then cycle on and off as the thermostat maintains the temperature.
7.
Lay the food on the grill with a spatula or tongs, not fingers.
8.
Wait till the food has cooked.
REMOVE THE FOOD
•
Check it's cooked. If you're in doubt, cook it a bit more.
•
Remove the cooked food with wooden or plastic tools.
CARE AND MAINTENANCE
1.
Unplug the appliance and let it cool down before cleaning or storing away.
2.
Pull the connector out of the power inlet.
3.
Wipe all surfaces with a clean damp cloth.
4.
Wash the drip tray in warm soapy water, or in the top rack of the dishwasher.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
4