Thrustmaster T-128 Guide Rapide page 2

AUTO-CALIBRATION AND WHEEL CENTERING
CHECKING AND RESETTING THE RACING WHEEL'S CENTER VALUE
• Checking the racing wheel's center value:
- On PC, access the Control Panel, then adjust the rotation angle to 900°.
- Place your racing wheel's axis on the 50% marker, then check that your racing wheel is physically
perfectly centered.
• Reconfiguring the racing wheel's center value
(If the racing wheel is slightly off-center in the Control Panel)
- If using a XBOX, we recommend performing this procedure in the XBOX system's menu (not in a
game).
- If using a PC, we recommend performing this procedure via the Windows® Desktop (not in a game),
after exiting the Control Panel.
1) Connect the racing wheel's USB cable (on XBOX or on PC), then wait for the auto-calibration
phase to end.
2) Turn the racing wheel fully to the left (until you reach the stop).
3) Turn the racing wheel fully to the right (until you reach the stop).
4) Make sure that your racing wheel is perfectly centered: while holding it in this position, press the
VIEW, MENU and SETTINGS buttons simultaneously for 5 seconds until the 4 RPM LEDs flash
once at the same time.
This means that the wheel's center value has been reset and automatically saved to the device's
internal memory (you do not need to repeat the procedure every time you connect the racing wheel).
2