Configuring Conference Units For Remote Callers; Priorité De Prise De Parole Pour Interlocuteurs Distants - Shure Microflex MXCW Mode D'emploi

Masquer les pouces Voir aussi pour Microflex MXCW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Role
Brief description
Delegate
Typical participant
Listener
No microphone required
Ambient
Improves audio mix
Delegates can remotely participate in
Remote Caller
events
Two delegates share one conference
Dual Delegate
unit

Configuring Conference Units for Remote Callers

1.
Change a conference unit to the remote caller role in the technician menu or web application.
2.
Call the remote participant on a mobile device.
3.
Connect the mobile device to the TRRS jack on the back of the conference unit.
To allow conference units to automatically change to the remote caller role when connecting a mobile device, go to Meeting 
Controls > Basic and select Auto-sense remote caller role cable.
Priorité de prise de parole pour interlocuteurs distants
Lorsqu'un appareil mobile est connecté à l'unité de conférence, l'interlocuteur distant entend l'une des trois tonalités qui in­
diquent sa connexion et sa priorité de prise de parole :
3 courtes tonalités ascendantes : connecté à l'événement et sur la liste des orateurs.
3 courtes tonalités descendantes : connecté et à l'écoute de l'événement, mais pas d'autorisation de prise de parole
2 courtes tonalités répétitives : l'unité de conférence a perdu la connectivité avec le point d'accès
Remarque : En cas de coupure de l'alimentation de l'unité de conférence, aucune tonalité n'est envoyée à l'interlocuteur distant.
Lorsqu'un emplacement de microphone devient disponible, un interlocuteur distant peut être ajouté à la liste des orateurs en
débranchant le câble de l'unité de conférence et en le rebranchant.
Details
Delegates represent the majority of participants in a meeting.
Depending on the microphone operation, delegates may
need to wait in the request queue until it is their turn to speak.
Participants use the device only to listen to the floor mix
(using the loudspeaker) or to an interpretation channel (using
headphones). There are no speaking permissions in this role,
but a chairperson can turn on this microphone manually.
This role is for spare, utility devices to add natural room am­
bient noise to the floor mix to aid during pauses in speech or
brief breaks between agenda items when no other partici­
pants are on the speaker list. There are no listening or spea­
king permissions in this role.
Go to Meetings Controls > Advanced > Enable ­
ambient microphones.
Connect a cell phone to a conference unit configured to the
remote caller role. A remote caller occupies any of the 8
unassigned microphone slots, and remains on the speak list
during the event.
Both the left and right buttons are configured as speak but­
tons, one for each participant. The speaker list shows both
delegates as individual speakers, but only one uplink channel
is being used by the shared microphone. Both delegates can
cast votes.
Shure Incorporated
42/93

Publicité

Table des Matières
loading

Table des Matières