Shure Microflex MXCW Mode D'emploi page 33

Use different SSIDs to separate conference units into independent systems for smaller events. When the room opens
up to support more participants, simply set all conference units to the same access point network to create a large
First, set an access point to a different SSID:
1. Open the MXCW web application and go to
2. (Optional) Rename one of the SSIDs network for easy identification, for example: Room C
3. Select that network and press Set to confirm the setting.
All connected microphones automatically update to the new network.
To update any other devices:
1. Open the technician menu on the MXCW640 by tapping the
volume control knobs and tap the right side of the screen.
2. Go to the wireless tab.
3. Depending on the Startup mode set on the unit, either scan for a network or view options in the list.
4. Choose an access point network and press Connect .
To combine rooms again, simply change the conference units back to the original network to create the larger system.
system.
Settings > SSIDs.
gear icon. While at the top of the page, hold down the
Shure Incorporated
33/93