Lock Conference Unit Power Button - Shure Microflex MXCW Mode D'emploi

①
• Assign a participant role
• Change the left-button functionality
②
• Display the firmware version of the conference unit and connected access point
• Factory reset the device
• Reboot the device
③
• Display the connected access point SSID
• Disconnect from the access point
④
• Change the startup mode
• Power off the device
Conference Unit Startup Mode
Set the startup mode to determine how MXCW conference units connect to the access point after powering on.
Access the technician menu and choose one of the following startup modes:
Last Connected (default)
List
Scan
Tip: When choosing the network manually, the list indicates the last connected access point with a clock icon.

Lock Conference Unit Power Button

Disable the power button on the bottom of the conference unit to prevent the device from being accidentally powered off. To
lock or unlock the power button:
1. Open the access point web application and click the
2. Go to Global device settings > Advanced permissions > Power button lock.
Automatically selects the network it was last connected to before powering down. New or
factory default devices use this setting to access the SSID 00 by default.
Manually choose from a prepopulated list of networks. To update the list with custom names,
rename the SSID labels in the web application and push the list to the registered wireless
devices.
The device scans for available access point networks and ranks them with strongest signal
at top, and weakest at the bottom. Manually select the network from the list.
wrench icon.
Shure Incorporated
17/93