GCE MediFlowTec Notice D'instructions page 10

If any leakage is detected, use the procedure in chapter 6.3 and return
the pro-duct to GCE for service.
The product shall not be disassembled or repaired when connected to
the source of the pressure.
REPAIRS ACTIVITIES COVER THE REPLACEMENT OF THE FOLLOWING
DAMAGED OR MISSING COMPONENTS:
• quick connector (probe),
EN
• fl ow head (valid only for MFII and MF+)
• plastic cover and handwheel (valid only for MFT)
The repairs shall be carried out by a GCE authorised person only.
Any product sent back to a GCE authorised person for maintenance shall
be properly packaged. The purpose of the maintenance has to be clearly
specifi ed (repair, maintenance). For product to be repaired a short descrip-
tion of fault and any reference to a claim number might be helpful.
Some repair activities concerning to the replacement of the damaged or
missing components can be carried out by the owner of the product. The
following parts can be replaced only:
• Caps,
• Stickers,
• Hose nipple (including o-ring),
To use suitable component, contact our service organization.
All labels on the equipment must be kept in good, legible condition by the
owner and the user during the entire product life time.
All seals and o-rings must be kept in dry, dark and clean environment by
the owner and the user during the entire product life time.
Use only original GCE components!
9. GLOSSARY
Consult instruction for
use
Caution
Keep away from heat and
fl ammable material
Keep away from oil and
grease
Humidity limit
Suitable for Home care
use
Suitable for Hospital
care use
Suitable for Emergency
care use
SN Serial number
REF Catalogue number
10/92