a. TRANSPORT AND START-UP
When transporting this unit, take it by the base and gently tilt it up to 45 °.
Do not lift the appliance by the door handle. Do not put the unit in a fully
horizontal position or upside down. Push the refrigerator on the wheeled
legs to move it.
Attention: After transporting the refrigerator, you must wait at least 8
hours before putting it into service.
b. UNPACKING THE DEVICE AND DISPOSING OF THE
PACKAGING ELEMENTS
• Remove all packing material around the appliance as
• Carton board and sheets of paper are recyclable. They must be
thrown in the collection bins provided for this purpose.
• The materials bearing the symbol
>PE<= polyethylene; >PS<= polystyrene; >PP<= polypropylene
This means that they can be recycled by depositing them in
appropriate collection containers.
•
Other packaging materials (adhesive, fasteners, etc.) should be
disposed of with household waste.
To know more: www.quefairedemesdechets.fr
c. CLEANING THE APPLIANCE:
Clean all parts of the refrigerator with water and a mild detergent
solution. Rinse it thoroughly and dry it with a soft cloth.
Note: The electrical parts of the device can be cleaned only with a dry
cloth.
III. BEFORE FIRST USE
well as the protective elements inside the appliance
compartments.
are recyclable:
EN-11