Installation; Before Operation; Important - CONTINENTAL EDISON CECC95APW Guide D'utilisation

IV. INSTALLATION

BEFORE OPERATION

Before using your new device, please read the following instructions
carefully: they contain important information regarding safety, installation,
operation and maintenance.
Keep this manual in a safe place; you may need it later.
Upon receipt, check that the device is not damaged. Damage due to
transport must be notified to your supplier before using your freezer.
Remove the packaging. Clean the inside of the appliance with lukewarm
water and non-aggressive dishwashing detergent. Rinse with clear water
and dry thoroughly (see cleaning chapter). Use a soft cloth.
If the freezer has been stored in cold environment (below + 5 ° C), it will
need a period of adaptation of at least 1 hour before it is started.
If the freezer has been transported to the side, leave it in normal position
for 12 hours before turning it on.
Setting up
IMPORTANT: The installation of this unit requires the intervention of
several people.
For reasons of safety and operation, the device must not be placed
outdoors.
Place the unit horizontally on a level and stable floor in a dry, well-ventilated
room (max 75% RH).
Never place the appliance near heat sources such as stoves or radiators,
and avoid placing it in direct sunlight or near other heat sources.
EN-12