Adjusting The Handle - ABC Design Cobra Instructions De Service

16. Inserting the mattress
Insert the mattress in the cover.
Lay the mattress on the base.
NB: The mattress is wedge-shaped. Make sure that the raised part is at the head end.

17. Adjusting the handle

To adjust the handle, press the buttons on both sides.
Now you can adjust the handle.
18. Fitting the apron
Fit the closed end of the apron over the lower end of the carrycot.
Extend the apron over the cot.
Secure the ends of the apron with the Velcro fastening provided on the outside of the hood.
19. Mounting the carrycot on the pushchair
a.
The adapter is fitted to the long side of the carrycot.
Place the carrycot onto the pushchair so that the catch mechanism engages.
b.
To take the carrycot off, press the catch (1) down and pull the lever (2) up.
Lift the cot up until it disengages.
WARNING: Always check before use that the carrycot is correctly secured
to the pushchair.
EN - 08