GF JRG CleanLine Filter Notice D'utilisation Et D'entretien page 31

1 Body
3 Nut
14 O-Ring
14 Strainer insert
16 Fine filter unit
Manutenzione JRG CleanLine
1. Drain the JRG CleanLine Combi/
2. Loosen the nut 3 by hand
3. Clean strainer insert and O-ring
8 Hand wheel
4. Re-assemble the valve and check
Filter by turning off water supply
(mains) and floor distribution
and reduce water pressure
(e.g. at the drain valve).
and remove filter unit 13
(filter unit and hand wheel).
or replace if needed (spare parts
set O-ring and strainer insert:
JRG Code 8171.200).
its proper functions.
E
31