Hdd Format; Change Password - LUXSAR VDR410 Manuel Utilisateur

HDD FULL WARNING
Use "◄ or ►" button to select one of the four settings (5% / 10% / 15% / 20%). The default is 10%.
The buzzer will turn on when free space left in the HDD go below the set value and alarm again
when the total free space left going down each 5%.
HDD CAPACITY
The HDD capacity will be indicated on the screen, it can't be revised.
HDD LEFT RATIO
The HDD left ratio sign will be indicated on the screen, it can't be revised.

HDD FORMAT

Use "◄ or ►" button to enter the HDD FORMAT menu.
PASSWORD INPUT : _ _ _ _
Use the view control button on the front panel to input the number.
is "1" , is "2" ,
When you key in the correct password, the screen will be displayed the following message:
PASSWORD CORRECT!
HARD DISK FORMATTED
Otherwise, the following error message will be displayed on the screen:
PASSWORD INCORRECT!

CHANGE PASSWORD:

Please refer to "SYSTEM SETUP"
is "3" , is "4"
CHANGE PASSWORD.
10% (5% / 10% / 15% / 20%)
76GB
73GB 97%
13