LUXSAR VDR410 Manuel Utilisateur page 38

3.6. Schedule record
SCHEDULE SETUP
0 0 3 3 6 6
[RIGHT,LEFT] TO MOVE [MENU TO EXIT]
[UP,DOWN] TO SELECT
Press ▲ or ▼ key on "SCHEDULE RECORD" & ◄ or ► to enter: Use the ◄ or ► button to select
items. Press the ▲ or ▼ button to confirm the selection.
Press MENU to go back to SETUP MENU.
There are 24 circles in the schedule table, which represent 24 hours.
Every circle has 3 options to select:
O: represents "fully record"
X: represents "no record"
A: represents "alarm record"
Use the ◄ or ►button to select hours.
Press ▲ or ▼ button to select the O / X / A (Fully / No / Alarm Record).
QUICK KEY:
Play Key to switch between O / X / A (Fully / No / Alarm Record) in all hours.
3.7. Event list
EVENT LIST
START TIME: 2007/JAN/01 12:07:06
END TIME: 2007/JAN/05 12:07:30
>01 RECORD
02 MOT CH1 2007/JAN/05 12:06:18
03 MOT CH2 2007/JAN/04 12:05:22
04 POWER
05 RECORD 2007/JAN/03 12:03:00
06 RECORD 2007/JAN/02 05:02:34
07 POWER
9 9 12 12 15 15 18 18 21 21
2007/JAN/05 10:07:06
2007/JAN/03 22:04:45
2007/JAN/01 12:07:06
24 24
11