LUXSAR VDR410 Manuel Utilisateur page 35

MENU SETUP PROTECT
Use or button to change ON or OFF.
CHANGE PASSWORD
Key in password with following sequence CURREBT PASSWORD -> NEW PASSWORD -> CONFIRM
PASSWORD. Initial number is 1111. Use the view control button on the front panel to input the
number. is "1" ,
SYSTEM SELECT
Use or button to change NTSC or PAL video system.
3.3. Camera setup
CAMERA SETUP
CAMERA SELECT
CAMERA RECORD
MOTION SENTSITIVITY
BRIGHTNESS
CONTRAST
HUE
EXIT
Press ▲ or ▼ key on "CAMERA SETUP" & ◄ or ► to enter: Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU back to SETUP MENU.
CAMERA SELECT
Use ◄ or ► button to select the camera from CH1 – CH4 to be adjusted.
CAMERA RECORD
Use ◄ or ► button to select recording function ON or OFF.
MOTION SENTSITIVITY
Use ◄ or ► button to adjust the sensitivity of the selected camera. From 0 (off) to 5 (MAX).
BRIGHTNESS
Use ◄ or ► button to adjust the brightness of the selected camera. Initial number is 5
(STANDARD).
CONTRAST
Use ◄ or ► button to adjust the contrast of the selected camera. Initial number is 5 (STANDARD).
is "2" , is "3" ,
CAM1
ON
1[MIN]
STANDARD
STANDARD
STANDARD
ON/OFF
is "4"
NTSC/PAL
CAM1/CAM2/CAM3/CAM4
ON/OFF
OFF / 1[MIN] / 2 / 3 / 4 / 5[MAX]
1/2/3/4/STANDARD/6/7/8/9/10
1/2/3/4/STANDARD/6/7/8/9/10
8