Selecting Pty; Setting Ct - Sony DSX-S300BTX Mode D'emploi

Local Link function (UK only)
This function enables you to select other local
stations in the area, even if they are not stored on
your preset list.
1 During FM reception, press
and select a preset number on which a local
station is stored.
2 Within 5 seconds, press
select the same preset number of the local
station again.
Repeat this procedure until the local station is
received.
(with the card remote commander)
1 During FM reception, press a number button
((1) to (6)) on which a local station is stored.
2 Within 5 seconds, press again a number button
of the local station.
Repeat this procedure until the local station is
received.

Selecting PTY

1
Press and hold (AF/TA) (PTY) during
FM reception.
The current program type name appears if the
station is transmitting PTY data.
2
Rotate the multi way encoder to select
the desired program type.
3
Press the multi way encoder.
The unit starts to search for a station
broadcasting the selected program type.
20
(BROWSE),
(BROWSE), and
Type of programs
News (News), Current Affairs (Current
Affairs), Information (Information), Sport
(Sports), Education (Education), Drama
(Drama), Cultures (Culture), Science
(Science), Varied Speech (Varied), Pop
Music (Popular Music), Rock Music (Rock
Music), Easy Listening (Easy Listening),
Light Classics M (Light classical), Serious
Classics (Classical), Other Music (Other
Music Type), Weather & Metr (Weather),
Finance (Finance), Children's Progs
(Children's Programmes), Social Affairs
(Social Affairs), Religion (Religion), Phone
In (Phone In), Travel & Touring (Travel),
Leisure & Hobby (Leisure), Jazz Music
(Jazz Music), Country Music (Country
Music), National Music (National Music),
Oldies Music (Oldies Music), Folk Music
(Folk Music), Documentary (Documentary)
Note
You cannot use this function in countries/regions
where no PTY data is available.

Setting CT

1
Set "CT on" in setup (page 41).
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.