Operation - Royal Sovereign HCE-200 Serie Guide De L'utilisateur

OPERATION

Place the heater on a firm level surface.
Keep combustible materials, such as furniture, beddings, papers, clothes, and curtains at least 0.9m (3 feet) away from the
front, the sides and rear of the heater. Do not use in bathroom or near water.
Unwind the power cord and plug the cord into electrical outlet. Be sure plug fits tightly in outlet. The appliance has a Power
Switch on the back body which needs to be pressed to connect the power.
When the heater Power Switch is pressed on, there will be a "beep" sound indicating that there is power to the unit.
The heater can be operated manually or by remote control, which requires two AAA batteries (not included).
Turn the heater ON by pressing the ON/OFF Button.
When initially turned on, the heater will be in Fan mode, indicating current temperature on digital display.
Press the Power Level Button and the heater will be in Low heat (750 Watts), indicated by the LCD Display.
Press the Power Level Button once more and the heater will be in High heat (1500 Watts).
Press the Mode Button to set the room at a specific temperature. Press " + " or " – " to set the desired temperature while
the temperature on LCD Display continues to blink.
Press the Mode Button once more and the "Timer" on the LCD Display will blink. Press " + " or " – " to set the timer. (This
feature allows you to set the length of time the heater will run before turning itself off from 1 hr to 12 hrs) LCD will display
remaining hours left on timer setting.
Press Oscillation (SWING) Button and the heater will oscillate. To stop the oscillation, press the Oscillating (SWING) Button
once again. Press ON/OFF Button to turn the unit OFF. The heater will remain in Fan mode for a few seconds until it cools
off, Heater will remember last temperature setting as default when turned back on.
Press the Power Switch on back of unit to turn the power OFF. Temperature memory will be lost.
Unplug if moving, cleaning or storing the unit.
SAFETY FEATURES
This heater has a built in safety features including overheat protection & Safety Tip-over Switch which will automatically shuts off
the heater if the heater is not in the upright position. The heater will resume back to normal operation when the heater is
returned to the upright position.
6