Function; Moisture Sensor; Initial Operation - Gardena 19030 Mode D'emploi

To prevent failure of the Sensor due to weak
batteries in conjunction with a lengthy absence,
batteries should be replaced in due course.

2. FUNCTION

Display / Sensors:

3. INITIAL OPERATION

To insert batteries:
10
The Sensor measures the soil moisture at the root level of the plants,
the lightness and the temperature automatically and sends the
measured results to the Gateway. (The values can be read using the
GARDENA smart app).
(1) Light sensor
(2) LED Connection display / Signal:
Green flashing: While connection
1
Green for 20 sec: Signal strength high
2
Yellow for 20 sec: Signal strength medium
Red for 20 sec: Signal strength low
(3) Temperature sensor (inside the unit)
(4)

Moisture sensor

3
4
The batteries are not included in the scope of delivery.
The Sensor must only be operated with 2 x alkalimanganese (alkaline)
batteries type LR6 (AA) (Mignon).
Under normal conditions of use, the service life is six months
(2 x app query per day).
CAUTION!
Rechargeable batteries should not be used!
This will depend on the previous operating life of
the batteries and the probable length of absence,
which should not exceed 6 month in total.