Ribimex PRTMEMIX400 Manuel D'instructions Et D'utilisation page 11

3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be missing
or damaged.
• Use and store in dry indoor environment.
• Maintain good housekeeping and sufficient lighting in the working area.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
3.2- Additional safety rules for electric power tool
• When the tool is not in use or before performing cleaning, turn it off and disconnect from
main power source.
• To reduce risk of injury, keep children and bystanders away while operating this power tool.
• Never leave the product running unattended.
• Dress properly. Do not wear loose clothing or jewellery. Keep hair, loose clothing, finger
and any parts of body away from openings or moving parts.
• To reduce the risk of electric shock, do not use near water or any liquid.
• Do not touch with wet hands.
• Do not expose the tool to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Maintain labels and rating plate through the life of service.
• Do not use the power tool if the switch does not turn on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
• Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
• Do not force the tool. Do not use the tools in any operations that beyond the intended
purpose.
• Remove any adjusting key or wrench before turning the power tool on.
• If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3.3- Special warnings when using this product
• Wear appropriate personal protective equipments (PPE) before starting the machine:
- Eye protection
- Hearing protection
- Dust mask when dust is generated
• WARNING! Do not use the tool on any materials containing asbestos, which is
carcinogenic.
• To avoid potential caught-in hazards, DO NOT wear work gloves while holding small
workpiece. Wear gloves only where necessary and if there is no risk of entanglement.
• Make sure that the conditions of tool and accessories are good before use. Cracks or
breakage may cause a personal injury or property damage.
• Keeps guards in place and working properly.
Page 11 / 25