TM
Guardian
Hotplate-Stirrers
2. BASIC FUNCTIONS
Quick Press
(.05 sec)
Note:
refers to beep in the following table.
I/O – Standby
Switch
Temp Knob
Functions
Speed Knob
Functions
Long Press
(.3 sec)
Turn unit on
(Press switch)
Turn unit off
(Press switch)
Change temp settings
(Rotate temp knob)
Turn heater on
(Long press temp knob until
unit beeps & green light
appears)
Change temperature
settings, while heating
(Rotate temp knob, the
setting will blink, then quick
press knob)
Turn heater off
(Long press temp knob until
unit beeps & green light
fades)
Enter settings menu
[heater & stirrer must be off]
(Press & hold temp knob
until "MENU" appears)
Change speed settings
(Rotate speed knob)
Turn stirrer on
(Long press speed knob until
unit beeps & green light
appears)
Change speed settings,
while stirring
(Rotate speed knob, the
setting will blink, then quick
press knob)
Turn stirrer off
(Long press speed knob until
unit beeps & green light
fades)
Press & Hold
(1.5 sec)
/
/
(If setting is idle for 6 sec, setting
will return to prior value)
/
/
(If setting is idle for 6 sec, setting
will return to prior value)
EN-3
Rotate
/