CAMSO ATV R4S Guide Rapide

ATV R4S TRANSFER KIT (RS)
P/N 5500-00-0365
Application: REAR ATV R4S TRACK SYSTEM
Please keep this instruction sheet for future reference or parts ordering information.
Kit Contents:
Ref Part description
1 Anti-rotation, LH bracket, RS
2 Anti-rotation, RH bracket, RS
3 HFSCS, M10-1.5X30, 10.9, ZP, TL, DIN6921
4 W, 7/16X1.0X0.072, 8, ZP, USS
INSTALLATION
1- Removal of existing parts
1.1 Disassemble anti-rotation arms installed on
System's rear undercarriages by removing end
bolts (a) and pulling apart the arms' components.
5500-00-0365-MAN
1.2 Remove bolts (b) and washers (c) to remove the
anti-rotation arm mounting brackets (d) installed
Qty
on the frames.
1
1.3 Remove wheel shaft bolts (b).
1
6
6
2- Installation of new parts
2.1 Secure new rigid suspension anti-rotation brackets
(g) to frames with new bolts (e) and washers (f)
provided in the installation kit.
Note: release track tension before installing new
bracket bolts that secure wheel shafts to
frames.
2.3 Tighten bolts (e) to 50 N-m (37 lb-ft) of torque.
Modifications to the System's frames are now
complete. To finalize the installation and adjustment of
the System, see the Installation Guidelines included in
the Transfer Kit.