Hilti NURON C 6-22 Mode D'emploi page 20

1.4 Product information
products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Charger
Generation
Serial no.
1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product
described here complies with the applicable legislation and standards. A
copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-
86916 Kaufering, Germany
2 Safety
2.1 General safety instructions
WARNING Study all safety instructions and other instructions, im-
ages and technical data with which this power tool is provided. Failure
to observe the instructions below can result in electric shock, fire and/or se-
rious injury.
Keep all safety instructions and instructions for future reference.
▶ Persons (including children) with reduced physical, sensory or mental
abilities or lack of experience and knowledge are not permitted to use
this product.
▶ Do not allow children to play with the product.
▶ If you mount the charger on a wall, make sure that the charger is securely
fixed to the wall.
▶ Install the charger in such a way that a battery inserted into it cannot fall
out.
14 English
C 6­22 | C 8­22
01
2275224
*2275224*