Stanley PB2500 Smart Manuel D'instructions page 20

E N G L I S H
7.2 UK DECLARATION OF CONFORMITY
We, Stanley Engineered Fastening, Nippon POP Rivets and Fasteners Ltd., Hosoda, Noyori-cho, Toyohashi,
Aichi, 441-8540 JAPAN, declare under our sole responsibility that the product:
Description:
Power Tool
Model:
STANLEY® Assembly Technologies / PB2500 Smart
to which this declaration relates is in conformity with the following designate UK Regulations:
The Supply of Machinery (Safety) Regulations 2008, S.I. 2008/1597 (as amended)
Electromagnetic Compatibility Regulations 2016, S.I. 20161091 (as amended)
The Radio Equipment Regulations 2017, S.I. 2017/1206 (as amended)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012, S.I. 2012/3032 (as amended)
And Designated Standards:
IEC 60745-1 : 2006 with the EN deviation
IEC 60745-2-16 : 2008 with the EN deviation
EN ISO 55014-1 : 2017
EN ISO 55014-2 : 2015
EN ISO 62233 : 2008
EN ISO 301 489-1 : 2019
Technical documentation is compiled in accordance with the Supply of Machinery (Safety) Regulations
2008, S.I. 2008/1597 (as amended).
The undersigned makes this declaration on behalf of STANLEY Engineered Fastening
Daisuke Mori
Director of Engineering, Japan
Nippon POP Rivets and Fasteners Ltd., Hosoda, Noyori-cho, Toyohashi, Aichi, 441-8540 JAPAN
Place of Issue:
Date of Issue:
The undersigned is responsible for compilation of the technical fi le for products sold in the United Kingdom and
makes this declaration on behalf of Stanley Engineered Fastening.
A. K. Seewraj
Director of Engineering, UK
Avdel UK Limited, Stanley House, Works Road, Letchworth Garden City, Hertfordshire, SG6 1JY UNITED KINGDOM
This machinery is in conformity with
Supply of Machinery (Safety) Regulations 2008, S.I. 2008/1597 (as amended)
20
Aichi, Japan
01-06-2021
EN ISO 301 489-17 : 2017
EN ISO 300 328 : 2016
EN ISO 62209-2 : 2010
EN ISO 62479 : 2010
EN ISO 50566 : 2017
EN ISO 12100:2010