1
General
Installation and operating instructions
About this document
The language of the original operating instructions is German. All other languages of these
instructions are translations of the original operating instructions.
These installation and operating instructions are an integral part of the product. They
must be kept readily available at the place where the product is installed. Strict adherence
to these instructions is a precondition for the proper use and correct operation of the
product.
These installation and operating instructions correspond to the relevant version of the
product and the underlying safety standards valid at the time of going to print.
EC declaration of conformity:
A copy of the EC declaration of conformity is a component of these operating instruc-
tions.
If a technical modification is made on the designs named there without our agreement,
this declaration loses its validity.
2 Safety
These operating instructions contain basic information which must be adhered to during
installation, operation and maintenance. For this reason, these operating instructions
must, without fail, be read by the service technician and the responsible specialist/oper-
ator before installation and commissioning.
It is not only the general safety instructions listed under the main point "safety" that must
be adhered to but also the special safety instructions with danger symbols included under
the following main points.
2.1
Indication of instructions in the operating instructions
Symbols:
General danger symbol
Danger due to electrical voltage
NOTE:
Signal words:
DANGER!
Acutely dangerous situation.
Non-observance results in death or the most serious of injuries.
WARNING!
The user can suffer (serious) injuries. "Warning" implies that (serious) injury to persons
is probable if this information is disregarded.
CAUTION!
There is a danger of damaging the product/unit. "Caution" implies that damage to the
product is likely if this information is disregarded.
NOTE:
Useful information on handling the product. It draws attention to possible problems.
Information that appears directly on the product, such as:
• Flow direction symbol,
• Identification for connections,
• Rating plate,
• Warning sticker,
Must be strictly complied with and kept in legible condition.
Installation and operating instructions Wilo-Stratos PARA/-Z
English
25