Makita UR016G Manuel D'instructions page 25

Replacing the plastic blade
Replace the plastic blade if it is worn out or broken.
► Fig.45
TROUBLESHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-
ment parts for repairs.
State of abnormality
Motor does not run.
Motor stops running after a little use.
The tool does not reach maximum
RPM.
Cutting tool does not rotate:
stop the machine immediately!
Abnormal vibration:
stop the machine immediately!
Cutting tool and motor cannot stop:
Remove the battery immediately!
OPTIONAL
ACCESSORIES
WARNING:
Only use the recommended
accessories or attachments indicated in this man-
ual. The use of any other accessory or attachment
may result in serious personal injury.
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
Probable cause (malfunction)
Battery cartridge is not installed.
Battery problem (under voltage)
The drive system does not work
correctly.
Battery's charge level is low.
Overheating.
Battery cartridge is installed improperly.
Battery power is dropping.
The drive system does not work
correctly.
Foreign object such as a branch is
jammed between the guard and the
cutting tool.
Cutting tool is loosely attached.
The drive system does not work
correctly.
Broken, bent or worn cutting tool
Cutting tool is loosely attached.
The drive system does not work
correctly.
Electric or electronic malfunction.
25 ENGLISH
When installing the plastic blade, align the direction of
the arrow on the blade with that of the protector.
► Fig.46: 1. Arrow on the protector 2. Arrow on the
blade
Remedy
Install the battery cartridge.
Recharge the battery cartridge. If recharging is not
effective, replace battery cartridge.
Ask your local authorized service center for repair.
Recharge the battery cartridge. If recharging is not
effective, replace battery cartridge.
Stop using of tool to allow it to cool down.
Install the battery cartridge as described in this
manual.
Recharge the battery cartridge. If recharging is not
effective, replace battery cartridge.
Ask your local authorized service center for repair.
Remove the foreign object.
Tighten the cutting tool securely.
Ask your local authorized service center for repair.
Replace the cutting tool.
Tighten the cutting tool securely.
Ask your local authorized service center for repair.
Remove the battery cartridge and ask your local
authorized service center for repair.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Cutter blade
• Nylon cutting head
• Nylon cord (cutting line)
• Plastic blade
• Protector
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.