Important Charging Notes - Skil PWRCORE 20 ID573901 Guide D'utilisation

IMPORTANT CHARGING NOTES

1. The charger was designed to rapidly charge the battery only when the battery temperature
is between 41°F (5°C) and 95°F (35°C). If the battery pack is too hot or too cold, the charger
will not begin charging the battery. (This may happen if the battery pack is hot from heavy
use). Once the battery temperature returns to its safe charging temperature, the charger will
automatically begin charging.
2. A substantial drop in operating time per charge may mean that the battery pack is nearing
the end of its life and should be replaced.
3. Remember to unplug the charger during storage.
4. If battery does not charge properly:
a. Check for power at the outlet by plugging another electrical device into the outlet.
b. Check to see if outlet is connected to a light switch that turns power "off" when the lights
are turned off.
c. Check the battery pack terminals for dirt. Clean with a cotton swab and alcohol, if
necessary.
d. If proper charging still does not occur, take or send the tool, battery pack and charger to
your local SKIL Service Center. Please refer to the Customer Service information on the
cover of this manual.
Note: Use of chargers or battery packs not sold by SKIL will void the tool warranty.
11