Ec Declaration Of Conformity - SystemAir Rotovex SR07 Instructions D'installation

Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
The manufacturer hereby confirms that the following
products:
Air handling units
Rotovex SR 07 EL
Rotovex SR 07 HW
Rotovex SR 09 EL
Rotovex SR 09 HW
Rotovex SR 11 EL
Rotovex SR 11 HW
Comply with the following EC-directives:

EC Declaration of Conformity

as defined by the EC Machinery Directive
98/37/EEC, Annex II A. Fans for ventilation in air
handling systems with air from non-explosion
hazardous premises. This machinery must not be put
into operation until prior to reading mounting
instructions and safety information.
The following harmonized standards are in
use:
EN 60 034-1 Rotating electric machinery; ratings and
performances.
EN 60 204-1
Safety of machinery; electrical equipment of machines;
general requirements.
EN 292-1
Safety of machinery; basic concepts, general principles
for design.
EN 294
Safety of machinery; safety distances to prevent danger
zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact
safety device is part of the extent of delivery.
_____________________________________________________________________________________________________
Rotovex SR07, SR09, SR11
brmo
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
EC Declaration of Conformity
As defined by the EC Low Voltage Directive 73/23/EEC
and 93/68/EEC
The following harmonized standards are in
use:
EN 60 335-1
Electric domestic products and similar – safety-general
requirements.
EN 60 335-2-40
Safety of household and similar electrical appliances -
Part 2-40: Particular requirements for electrical heat
pumps, air-conditioners and dehumidifiers.
EN 50 106 Electric domestic products and similar-
Safety-Instructions for control of manufacture.
Remark: EN 50 106 complies for internally wired
products only.
EC Declaration of Conformity
As defined by EC's EMC-directive 89/336/EEC,
92/31/EEC and 93/68/EEC
The following harmonized standards are in
use:
EN 61000-6-4: Electromagnetic compatibility (EMC) -
Part 6-4: Generic standards - Emission standard for
industrial environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 7 March 2008
Mats Sándor
Technical Manager
5
Utilisation et maintenance
www.systemair.fr