Déclaration De Conformité Ce - SystemAir Topvex TR 09 Instructions D'installation

FR
Déclaration de conformité CE
Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
The manufacturer hereby confirms that the following
products:
Air handling units
Topvex TR 09 EL
Topvex TR 09 HW
Topvex TR 12 EL
Topvex TR 12 HW
Topvex TR 15 EL
Topvex TR 15 HW
Comply with the following EC-directives:
EC Declaration of Conformity
as defined by the EC Machinery Directive
98/37/EEC, Annex II A. Fans for ventilation in air
handling systems with air from non-explosion
hazardous premises. This machinery must not be
put into operation until prior to reading mounting
instructions and safety information.
The following harmonized standards are in
use:
EN 60 034-1 Rotating electric machinery; ratings
and performances.
EN 60 204-1
Safety of machinery; electrical equipment of
machines; general requirements.
EN 292-1
Safety of machinery; basic concepts, general
principles for design.
EN 294
Safety of machinery; safety distances to prevent
danger zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact
safety device is part of the extent of delivery.
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
EC Declaration of Conformity
As defined by the EC Low Voltage Directive
73/23/EEC and 93/68/EEC
The following harmonized standards are in
use:
EN 60 335-1
Electric domestic products and similar – safety-
general requirements.
EN 60 335-2-40
Safety of household and similar electrical
appliances - Part 2-40: Particular requirements for
electrical heat pumps, air-conditioners and
dehumidifiers.
EN 50 106 Electric domestic products and similar-
Safety-Instructions for control of manufacture.
Remark: EN 50 106 complies for internally wired
products only.
EC Declaration of Conformity
As defined by EC's EMC-directive 89/336/EEC,
92/31/EEC and 93/68/EEC
The following harmonized standards are in
use:
EN 61000-6-4: Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards - Emission standard
for industrial environments.
EN 61000-6-2 Electromagnetic compatibility (EMC)
– Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 29 Jan 2007
Mats Sándor
Technical Manager
2