Télécharger Imprimer la page

Worx WX445 Notice Originale page 14

Scie circulaire avec laser

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
ENVIRONmENTAL
pROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
14
Circular saw with laser
pLug REpLACEmENT
(uK & IRELAND ONLy)
If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
As the colors of the wires in the mains lead of this
appliance may not correspond with the colored
markings identifying the terminals in your plug,
proceed as follows. The wire which is colored
blue must be connected to the terminal which is
marked with N. The wire which is colored brown
must be connected to the terminal which is
marked with L.
wARNING!Never connect live or neutral
wires to the earth terminal of the plug. Only
fit an approved 13ABS1363/A plug and the correct
rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
BROwN =LIVE
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
EN

Publicité

loading

Ce manuel est également adapté pour:

Wx445.1