HumanTechnik Signolux A-26810 Mode D'emploi page 15

Mounting the »alarmo«
The »alarmo« can be mounted using
the supplied wall mount. To use it, fix
the wall mount onto a wall (or rafter,
cupboard etc.) When mounting onto a
brick- or stone wall, you may need a
power drill and stone bit to do so. Use
the supplied wall plugs in this case.
Once fixed, hang the »alarmo« onto
the wall mount bracket.
Maintenance and care
The »alarmo« does not require any
maintenance. If the unit does become
dirty, simply wipe it clean with a soft,
damp cloth. Never use spirits, thinners
or other organic solvents.
Do not set up the unit where it
will be exposed to full sunlight for
long periods. In addition it must be
protected against excessive heat,
moisture and severe mechanical
shock.
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
Warranty
The »alarmo« is a very reliable prod-
uct. Should a malfunction occur de-
spite the unit having been set up and
operated correctly, please contact
your dealer or the manufacturer di-
rectly.
This warranty covers the repair of the
product and returning it to you free of
charge. It is recommended that you
send in the product in its original pack-
aging, so keep the packaging for the
duration of the warranty period The
warranty does not apply to damage
caused by incorrect hand-ling or at-
tempts to repair the unit by people not
authorised to do so (destruction of the
seal on the unit).
Repairs will only be carried out under
warranty if the completed warranty
card is returned accompanied by a
copy of the dealer's invoice/till receipt.
Always specify the product number
in any event.
English 15