Sennheiser EM 3031-U Notice D'emploi page 34

Mounting the receiver into a rack
With the two rack mount "ears" supplied, the receiver can be mounted into a 19" rack (1 U). The
rack mount "ears" are screwed to the receiver on the left and right
Note
If you wish to connect the antennæ to the front side, you must now pull the cables
of the GA 3030-AM antenna mount through the holes on the rack mount "ears"
before mouting the "ears"
The GA 3030-AM antenna mount (accessory, see chapter 23) allows the antennæ to be connected
to the front of the receiver, for example if the rear of the rack is closed.
Mount the antenna holders to the right and left to the handles of the receiver
cables, which are firmly fixed to the antenna holders, are connected to the antenna sockets on the
rear of the receiver.
Assembly instructions
Do not place receivers in direct proximity to digitally controlled devices!
Site the receivers as high as possible so that the receiving antennæ have a
"free line of sight" to the transmitter antennæ!
All manuals and user guides at all-guides.com
.
.
. The connection
35