Table des Matières
Publicité
Step 22
You will need someone's help in this step.
å
NOTE: Your Hutch must be attached to the 412079
å
Credenza or 413670 L-Desk as indicated in this step. Only
the 412079 Credenza is being shown in the diagrams.
Carefully position the Hutch on top of the 412079
å
Credenza as shown in the upper diagram.
Fasten the Hutch to the 412079 Credenza. Use two
å
SILVER 7/8" PAN HEAD SCREWS (YY) through the holes
in the MOUNTING PLATES (P) and into the 412079 Top.
NOTE: There are no pre-drilled holes in the 412079 Top.
å
Use a little extra force while turning these SCREWS.
Now, fasten the LOWER BACK (K) to the 412079 Top
å
as shown in the lower diagram. Use nine BLACK 9/16"
LARGE HEAD SCREWS (ZZ).
K
BLACK 9/16" LARGE HEAD SCREW
(9 used for the LOWER BACK)
www.sauder.com/services
0 7 9
4 1 2
z a
d e n
C r e
ZZ
P
412308
YY
SILVER 7/8" PAN HEAD SCREW
(2 used in this step)
Page 27
P
Publicité
Table des Matières
