Sauder Hutch Mode D'emploi page 26

Step 21
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow the
å
text below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal),
å
turn the adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen
å
both vertical adjustment screws. Move the DOORS up
or down to the desired location. Tighten the screws
after making adjustments.
To adjust the DOORS in or out (depth), loosen the
å
mounting screw one turn and move the DOORS in
or out, as needed. Tighten the mounting screw after
making adjustments.
Page 26
Mounting screw (depth)
(vertical adjustment)
412308
Adjusting screw (horizontal)
www.sauder.com/services