Sauder Hutch Mode D'emploi page 20

Step 15
Carefully stand your unit upright.
å
NOTE: Hold the FRONT VALANCE (Q) in place until this
å
step is completed. Do not allow the VALANCE to hang
freely until it is completely fastened.
Fasten the VALANCE CONNECTORS (DD) to the TOP (H).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (ZZ).
Now, slip fi ve VALANCE BRACKETS (EE) into the groove
å
in the FRONT VALANCE (Q). Fasten the VALANCE
BRACKETS to the TOP (H). Use fi ve BLACK 9/16" LARGE
HEAD SCREWS (ZZ). Do not completely tighten the
SCREWS at this time.
BLACK 9/16" LARGE HEAD SCREW
(7 used in this step)
Page 20
DD
EE
ZZ
412308
Q
H
(5 used)
Pro Tip: Lift with your
legs. And, you know,
your arms.
DD
www.sauder.com/services