Sauder Hutch Mode D'emploi page 10

Step 5
Fasten the INNER ENDS (C and D) to the TOP (H). Use
å
four BLACK 1-7/8" FLAT HEAD SCREWS (UU).
NOTE: Be sure the dowel end of the TWIST-LOCK®
å
FASTENERS in the LONG SHELF (I) insert into the holes
in the INNER ENDS (C and D).
Fasten the LONG SHELF (I) to the INNER ENDS (C
å
and D). Tighten four TWIST-LOCK® FASTENERS.
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
Page 10
UU
H
S u r
D
f a c
e w
i t h o
u t h
o l e
s
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole
of the adjoining part.
NOTE: The dowel end of the FASTENER must remain
fully inserted in the hole of the adjoining part while
locking the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as
tight as possible.
I
Finished edge
412308
®
FASTENER
Dowel end
These edges
should be even.
C
S u r
f a c
e w
i t h
h o l
e s
www.sauder.com/services