TEFAL Ultracompact WD300033 Mode D'emploi page 35

Connection and pre-heating
Close the appliance.
Plug the cord in the wall socket: the red light
comes on A .
During first use, the appliance may give off a slight
odour and smoke. This is normal.
Check that your electric supply is compatible with
the power and the voltage indicated under the
appliance.
Connect the appliance to a wall socket with an earth
connection.
If the power supply cord is damaged, it must be
replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a
hazard.
Cooking
Allow the appliance to pre-heat, the green light
comes on when the correct cooking temperature is
reached B .
Do not touch the metallic surfaces of the appliance
during pre-heating, because they are very hot.
Select the desired temperature using the
thermostat C .
Open the appliance.
Pour the waffle batter into the centre of the hollow
part of the plate D .
Immediately close the appliance, using the
handle, so that the batter is evenly distributed
over the whole surface of the plate E .
Do not hold onto the handle of the appliance
during cooking, as this will prevent the batter from
rising.