Field-Programmable Settings; Technical Characteristics; Fluid Characteristics - Emerson AVENTICS SentronicD Manuel D'installation

GB
6.

FIELD-PROGRAMMABLE SETTINGS

DISPLAY/PRESSURE READINGS
The actual outlet pressure is displayed during normal operation. See „Parameters/Display" section.
Other displays:
Hnd indicates that the Manual mode has been selected.
SOF Internal error of pressure control. Replace valve or contact our Product Support.
Err Internal overflow.
AEr Autozero overflow. Contact our Product Support.
PUSHBUTTONS
To enter the Manual mode, press and hold both pushbuttons simultaneously during power up. "Hnd" appears in the
display.
Use the UP button to increase the outlet pressure and the DOWN button to decrease it. The actual outlet pressure is
displayed.
Quick presses on the buttons allow you to make slight changes in the pressure rating.
Longer presses allow you to make quick pressure changes.
Press both pushbuttons simultaneously to exit the manual mode.
7.

TECHNICAL CHARACTERISTICS

CONSTRUCTION
Directly operated valve
Body: Aluminium
Internal parts: POM
Seals: Perbunan (NBR), Fluorelastomer (FKM)
Degree of protection: IP65
7.1

FLUID CHARACTERISTICS

FLUIDS
PORTS
MAX. INLET PRESSURE
TEMPERATURE / FLUID
TEMPERATURE / AMBIENT
HYSTERESIS
LINEARITY
REPEATABILITY
MINIMUM SETPOINT
MINIMUM OUTLET PRESSURE
10
INSTALLATION
Assembly position: any; for optimum performance vertically with
solenoid at the top.
Air: filtered at 50 µm, free of condensate
Connections: Hemp or Teflon tape must not be used.
Electrical connection: Select a wire section that will give a a voltage
drop of less than 2 volts at 2A.
: Air or neutral gas, filtered at 50 µm, free of condensate, lubricated or not
: G1/8-G1/4-G3/8, see section 3
: see section 3
: 0...60 °C
: 0...50 °C
: <1% of span
: <0.5% of span
: <0.5% of span
: 100mV (0.2 mA/4.2mA) with shut-off function
: <1% of span
Visit our website at Emerson.com/AVENTICS
INSTALLATION