SEFRAM SEFRAM70 Manuel D'utilisation page 31

• Remove test lead from Meter before opening the battery door
or Meter case.
IP2X test leads
It is mandatory to use the IP2X test leads supplied by manufacturer to
be compliant with EN61243-3 and UTE 18-510. If other test leads are
connected to the meter, the safety of the user can be impaired and
non-voltage check is not possible according to standard.
• For CAT III or CAT IV environments, use the IP2X test leads or the
optional non IP2X test leads with the probe tip guard cap fixed firmly.
Without the probe tip
guard cap, the test leads can be used in CAT II environment
ONLY.
• Make sure test leads are firmly connected to instrument and
other accessories.
 Warning