Maintenance And Service; After-Sales Service And Application Service - Bosch Wireless Charging L-BOXX Bay Professional Notice Originale

OBJ_BUCH-2572-001.book Page 14 Tuesday, September 1, 2015 9:31 AM
14 | English
Troubleshooting – Causes and Corrective Meas-
ures
Cause Corrective Measure
Red error indicator 5 flashes
No charging procedure possible
Battery not (correctly) Put the battery in the correct
positioned in the L-BOXX position in the Wireless
Charging L-BOXX inlay, with
the underside of the battery
facing the base of the
L-BOXX.
Detection of foreign object Remove object
An object other than/in
addition to the battery is on
the charging platform 1
(possibly in the L-BOXX)
Wrong battery positioned in Position a compatible battery
L-BOXX
Wrong L-BOXX inlay used (as Use the correct L-BOXX inlay
a result, the batteries are not (recognisable by Wireless
in the correct position) Charging sticker on the
L-BOXX)
Battery pack defective Replace the battery
Standby indicator (green) 3 does not illuminate
On-board voltage too low Start engine (charge starter
battery).
Mains plug of battery charger Insert mains plug (fully) into
not plugged in (properly) the socket outlet
On-board socket, socket Check mains or on-board
outlet, mains cable or voltage, have charger
charger defective checked if necessary by an
authorised after-sales service
On-board voltage too low
centre for Bosch power tools.

Maintenance and Service

If the battery charger should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an authorised after-sales service agent for Bosch
power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number on the type plate of the
battery charger.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
1 609 92A 1FM | (1.9.15)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Power Tools