Assembling The Exersaucer - Stage 3 (Optional) - Evenflo Baby Active ExerSaucer Mode D'emploi

Stage 3 (Optional)
P
D
D
Q
B
C
R
1. Remove toys from ExerSaucer tray. Turn ExerSaucer upside
down and remove optional mat
2. Remove two (2) feet
D
underside of tray. See page 6 for removing and storing feet.
3. Fold two (2) legs to their lowest position. Push release button
B
and rotate leg down until it locks into the lowest position.
C
Repeat until two (2) legs without feet are locked into the lowest
position. Pull up on legs to make sure they are locked in place.
4. Fold third leg to the angled position. Push on leg to make
R
sure it is locked in position.
7
Assembling the ExerSaucer
Stage 3 (Optional)
from three (3) feet
P
closest to spinner toy . Store feet on
Q
.
D