Kärcher BD 43/25 C Bp Mode D'emploi page 18

Description
Disc brush, white (very soft)
Disk brush, natural (white)
Disk brush, red (medium, standard)
Disk brush, black (hard)
Driver plate pad
Pad, red (medium soft)
Pad, green (medium hard)
Pad, white
Pad, black (hard)
Microfiber pad
Pad, beige (natural hair proportion)
Diamond pad, white
Diamond pad, yellow
Diamond pad, green
Suction bar, 850 mm, straight
Suction bar, 850 mm, bent
Set homebase box
Mop holder
Adapter Homebase
Double hook
Mop clip
Bottle hook
Universal hook
Technical specifications
Power
Nominal voltage
Battery capacity
Average power consump-
tion
Rated power suction turbine W
Rated power brush drive
Vacuuming
Vacuum power, air volume
(max.)
Vacuuming power, negative
pressure (max.)
Cleaning brushes
Brush speed
Brush diameter
Dimensions and weights
Theoretical surface cleaning
performance
Max. working range incline %
Fresh/waste water tank vol-
ume
Max. water temperature
Ambient temperature
Net weight (transport
weight)
Total weight (ready to oper-
ate)
Dimensions of battery com-
partment
Values determined as per EN 60335-2-72
Total oscillation value
Uncertainty K
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L +
WA
Uncertainty K
WA
18
Part no.:
4.905-024.0 For the gentle cleaning of sensitive surfaces.
4.905-023.0 Made of natural fibres for spot cleaning and polishing.
4.905-022.0 For the use with all common cleaning tasks.
4.905-025.0 For heavy soiling and for deep cleaning. For robust floorings only.
4.762-533.0 For cleaning with pads. With quick change coupling and center lock.
6.369-470.0 For cleaning and cleanering of all floors.
6.369-472.0 For cleaning heavily soiled floors and for deep cleaning.
6.369-469.0 For polishing floors.
6.369-473.0 With stubborn soiling and for deep cleaning.
6.905-526.0 Routine cleaning and basic cleaning of fine stoneware tiles
6.371-081.0 For polishing and refreshing of hard and flexible floorings.
6.371-256.0 For coarse cleaning and upvaluation. Removes small scratches and ensures a
6.371-257.0 For coarse cleaning and upvaluation. Removes fine scratches and ensures an
6.371-238.0 For polishing high-gloss coated floor coverings and for quick polishing of terraz-
4.777-401.0
4.777-411.0
4.035-406.0
9.753-023.0
5.035-488.0
6.980-077.0
6.980-078.0
6.980-080.0
4.070-075.0
EU Declaration of Conformity
We hereby declare that the machine de-
scribed below complies with the relevant
V 24
basic safety and health requirements of the
Ah (5h) 80/76
EU Directives, both in its basic design and
W 1100
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
500
without our prior approval.
W 600
Product:
Type:
l/s 24
kPa 12 (120)
Relevant EU Directives
(mbar)
2006/42/EC (+2009/127/EC)
2014/30/EU
1/min 155
2011/65/EU
mm 430
Applied harmonized standards
EN 60335–1
m²/h 1600
EN 60335–2–72
EN 55012: 2007 + A1: 2009
2 EN 61000–6–2: 2005
EN 62233: 2008
l 25/25
EN IEC 63000: 2018
Applied national standards
°C 60
-
°C 5...40
The signatories act on behalf of and with of
kg 109(107)
the authority of the company management.
kg 137 (135)
mm 350 x
Chairman of the Board of Management
350
Documentation supervisor:
S. Reiser
m/s <2,5
2
Alfred Kärcher SE & Co. KG
m/s 0,2
2
Alfred-Kärcher-Straße 28-40
dB(A) 66
71364 Winnenden (Germany)
dB(A) 1
Tel.: +49 7195 14-0
dB(A) 81
Fax: +49 7195 14-2212
Winnenden, 2021/02/01
Accessories
Description
clean, semi-gloss surface.
even more homogenous and shiny surface.
zo and natural stone surfaces.
Floor cleaner
1.127-xxx
1.515-xxx
Director Regulatory Affairs & Certification
8
-
EN
Declaration of Conformity
We hereby declare that the product de-
scribed below complies with the relevant
provisions of the following UK Regulations,
both in its basic design and construction as
well as in the version put into circulation by
us. This declaration shall cease to be valid
if the product is modified without our prior
approval.
Product: Floor cleaner
Type: 1.127-xxx
1.515-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2012/3032 (as amended)
Designated standards used
EN 60335–1
EN 60335–2–72
EN 55012: 2007 + A1: 2009
EN 61000–6–2: 2005
EN 62233: 2008
EN IEC 63000: 2018
National standards used
-
The signatories act on behalf of and with of
the authority of the company management.
Director Regulatory Affairs & Certification
Chairman of the Board of Management
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/02/01