Troubleshooting - Husqvarna 350iB Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To do a check of the air intake
1. Make sure that the air intake is not blocked.
2. Stop the product and remove leaves or unwanted
material if it is necessary.
CAUTION:
decreases the blowing capacity of
the product and increases the work
Keypad
Keypad
Green LED flashing
Battery
Condition
The battery warning LED
flashes.
The battery warning LED
comes on.
1776 - 003 - 20.04.2022
A blocked air intake

Troubleshooting

Possible faults
Low battery power.
Possible faults
Temperature deviation, the
battery is too cold or too hot
to use.
The battery is empty.
Permanent battery error.
temperature of the motor. If the motor
becomes too hot, it can result in motor
failure.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
Possible action
Charge the battery.
Possible procedure
Let the battery cool down or move it indoors to warm
it up. When the battery has the correct temperature,
it can be used again. Use the battery in ambient
temperatures between -10 °C (14 °F) and 40 °C (104
°F).
Charge the battery.
Speak to your dealer.
13

Publicité

Table des Matières
loading

Table des Matières