To Start The Product; To Stop The Product - Husqvarna 350iB Manuel D'utilisation

1. Make sure that the battery is fully charged.
2. Slide the battery into the battery holder of the
product. The battery must slide easily, if not, it is not
installed correctly.
3. Press the lower part of the battery and push it in as
far as it will go into the battery compartment. The
battery will lock into position when you hear a click.
4. Make sure that the latches snap in place correctly.

To start the product

1. Push and hold the power button (A) until the green
LED light (B) comes on.
B
2. Use the power trigger to control the speed.

To stop the product

1. Release the power trigger.
2. Push and hold the power button until the green LED
light comes off.
1776 - 003 - 20.04.2022
3. Remove the battery from the product. Push the two
release buttons and pull out the battery.
To set the optimal airflow for your work
1. Push the power trigger and hold it at the optimal
airflow for your work.
2. Push the cruise control button to set the selected
airflow. The LED comes on.
A
11