Publicité
Les langues disponibles
Les langues disponibles
Instruction manual
•
Alternating display of the temperature and the remaining cooking
time during operation.
Operating indicators
•
Runs successively when in operation and flashes when the
operation has been interrupted.
PREPARATION AND USE
Preparation
•
Place the appliance on a stable, horizontal, and level surface, do
not place the appliance on non-heat-resistant surfaces.
•
Plug the appliance in an earthed socket, it will beep once and the
ON/STANDBY icon will illuminate.
•
Touch the ON/STANDBY icon. The appliance will beep once, the
control panel will illuminate and the Basket 1 icon will flash
repeatedly.
Pre-heating the appliance
Generally, it is not always necessary to preheat the Aerofryer
however if your recipe does require pre-heating follow these steps
below.
•
If needed, place the crisping trays in the baskets.
•
Place the empty baskets in the Aerofryer.
•
Manually set the pre-heating time and temperature to 80°C for 5
minutes by the using the Temperature Up/Down and the Time
Up/Down icons.
•
Press [START/PAUSE] to start the operation.
8
•
The appliance will start pre-heating. The "In Operation" indicators
will run and the temperature and the remaining time will be shown
in the display.
•
When the operation is complete the appliance will beep 5 times
and the ON// STANDBY icon will illuminate and the appliance is
ready for use.
USE
•
Note: When cooking in both baskets simultaneously, it is
advisable to cook similar foods for which the desired heating
temperatures would not vary more than 20°C.
•
Remove the empty basket(s) from the Aerofryer.
•
If needed, place the crisping trays in the baskets.
•
Place the food in either or both of the baskets and slide the
baskets back into the Aerofryer.
•
Note: Do not overfill. To ensure proper cooking and air
circulation, NEVER fill any Aerofryer basket more than 2/3 full.
•
Touch the ON/STANDBY icon. The appliance will beep once, the
control panel will illuminate and the Basket 1 icon will flash
repeatedly.
•
Program the Baskets by using a suitable pre-set cooking program
or use manual programming of the cooking time and temperature.
Using a pre-set program
•
Select Basket 1 by touching the Basket 1 icon.
Publicité
