Getting Started
Playable discs on this unit
This unit can play CD-DA (also containing CD
TEXT) and CD-R/CD-RW (MP3/WMA/AAC
files (page 22)).
Type of discs
CD-DA
MP3
WMA
AAC
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Canceling the Demo mode
You can cancel the demonstration display which
appears during turning off.
1
Press and hold the control dial.
The setup display appears.
2
Rotate the control dial until "Demo"
appears, then press it.
3
Rotate the control dial to select "off."
then press it.
The setting is complete.
4
Press
(BACK).
The display returns to normal play/reception
mode.
6
Label on the disc
Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 23.
Setting the clock
The clock uses a 24-hour digital indication.
1
Press and hold the control dial.
The setup display appears.
2
Rotate the control dial until "Clock
Adjust" appears.
3
Press the control dial.
4
Rotate the control dial to set the hour,
then press it.
5
Rotate the control dial to set the
minute, then press it.
To move the digital indication, press the
control dial/
(back) +/–.
The setup is complete and the clock starts.
Tip
You can set the clock automatically with the RDS
feature (page 13).