Publicité
Maintenance and care
WARNUNG !
Injuries or material damage due to
improper actions.
Do not open the device.
¾
Observe the relevant safety and
¾
accident prevention regulations
during all maintenance and
servicing work.
The device requires little maintenance. There are
only a few points which have to be checked at
regular intervals to keep the machine operational for
years to come.
▸
Inspect the following for damage at regular
intervals:
— Mains plug and cable
— Welding torch and connections
— Workpiece lead and connection
Accessories and spare parts
If. in spite of careful manufacturing and testing pro-
cesses, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the name plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer
service workshop.
We reserve the right to make technical changes.
We accept no liability for printing errors.
22
Disposal
Electrical power tools, accessories and packaging
should be sorted and submitted to an environmental-
ly-sound recycling facility.
EU countries only:
Do not dispose of your electrical
power tool in household waste.
According to European Directive
2012/19/EU on waste electrical
and electronic equipment and its
implementation in national law, broken and unser-
viceable electric power tools must be collected
separately and submitted to an environmentally
sound recycling facility.
Declaration of Conformity
We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN 60974-1:2012,
• EN 60974-10:2007
in accordance with the regulations stipulated in the
directives:
EU directive
• 2011/65/EU
• 2014/35/EU
• 2014/30/EU
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PCV
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
M. Strobel
Director
Product Management
Künzelsau: 25.08.2015
Dr.-Ing. S. Beichter
Director Quality,
Authorised Signatory
Publicité
