Product Specifications; Technical Data - F.F. Group GHB 223 PLUS Notice Originale

Table des Matières

Publicité

GHB 223 PLUS
shown through loss of sensitivity, torpor, itching,
pain and discoloring of or structural changes to the
skin. These effects can be worsened by low ambient
temperatures and/or by gripping the handgrips ex-
cessively tightly. If the symptoms occur, the length
of time the machine is used must be reduced and a
doctor consulted.
WORKING AREA HAZARDS
Thoroughly inspect the whole work area and use a
rake or yard brush to manually loosen debris and
remove anything that could be projected by the
machine or be a hazardous source (stones, branch-
es, iron wire, bones etc.). Check that there are no
bystanders or pets within at least 15 meters of the
machine's range of action.
Do not direct the silencer and therefore the exhaust
fumes towards flammable materials.
Always check for any objects that may block the air
intake screen before beginning to work. A clogged
air intake reduces the machine's blowing capacity
and increases the engine's working temperature,
which can result in engine failure.
Do not operate the engine in a confined space
where dangerous carbon monoxide fumes can de-
velop. Don't operate the machine near open win-
dows.
Work only in daylight or with good artificial light in
good visibility conditions.
When working in dry dusty soil conditions, it is rec-
ommended to moisten the surface slightly.
Try not to cause any disturbance. Use this machine
at reasonable times of the day only (not early morn-
ing or late evening when the noise could cause dis-
turbance).
Take on a firm and well-balanced position. Where
possible, avoid working on wet, slippery ground or
in any case on uneven or steep ground that does not
guarantee stability for the operator.

PRODUCT SPECIFICATIONS

INTENDED USE
This machine was designed and manufactured for
blowing leaves, grass, paper and similar materials,
e.g. in lawns, pathways, car parks and roads.
Any other use differing from the above-mentioned
ones could be hazardous, harm people and/or dam-
age things and the machine.
IMPROPER USE
The machine must not be used for blow hazardous
materials, e.g. accumulation of inflammable or ex-
plosive products, hot embers or combustion mate-
rial without a flame, lit cigarettes, pieces of glass,
sharp objects, metal objects, stones and any other
object that could be dangerous to the operator and
others.
Examples of improper use may include, but are not
limited to:
• Aiming the air shot towards persons and/or ani-
mals;
• Using the machine without the accessories spe-
cifically supplied by the manufacturer for specific
uses, or use of accessories in a way not intended in
these instructions;
• Use of the machine by more than one person.

TECHNICAL DATA

Article number
Model
Engine
Cylinder displacement
Cylinder bore
Stroke
Idle speed
Maximum engine power
Maximum engine speed
Ignition system
Spark plug
Electrode gap
Fuel and lubrication system
Fuel tank capacity
Weight
Net Weight without fuel
Noise emissions
Sound power level, mea-
sured
Sound power level, guar-
anteed
Sound levels
Equivalent sound pressure
level at the operator's ear
Equivalent vibration levels
Upper handle
Lower handle
Performance
Maximum Air Volume
Maximum air speed
IDENTIFICATION (Fig. 1-4)
1. Throttle lock
2. Throttle control
3. Starter rope
4. Air cleaner
5. Engine
6. Auxiliary handle
7. On/Off switch
8. Protective cage
9. Protective cage locking screw
10. Choke
11. Primer bulb
OPERATION
PREOPERATION
Unpacking and completing the assembly should
English | 11
46 329
GHB 223 PLUS
cc
22,5
mm
32
mm
27
rpm
3.200
kW / hp
0,65/0,87
(r/min)
8.000
CMR6A
mm
0,6-0,7
litre
0,45
kg
4,1
dB
103
106
Lwa dB
93
dB
m/s²
7,7
m/s²
6
m³/h
538
m/s
88
www.ffgroup-tools.com

Publicité

Table des Matières
loading

Table des Matières